
Add to Cart
VR Safety Joint For Drill Stem Testing Service 5" x10000psi
VR Safety joint is a compact, right-hand safety joint used in the drill stem testing string. It is run immediately above the packer assembly to ensure that a minimum number of tools are left in the hole if it becomes necessary to release the safety joint. The tool’s bypass feature acts as an auxiliary to the Hydrospring tester bypass to allow fluid to pass though the packer while the work string is being pulled out of the hole.
A spline and lug arrangement, joining the male and female parts of the left-hand safety joint thread, lock to prevent unintentional back-off from the tool during normal manipulation of the drill pipe during testing. Because of the spline and lug configuration, the slips must be dropped in place before the drill pipe is lowered after every stand of pipe is pulled out of the hole.
Technical parameter of Tension Sleeve RTTS Safety Joint
1 | Nominal Size | 5” | ||||||||||||||||||||||||||||||
2 | OD | 127.5mm | ||||||||||||||||||||||||||||||
3 | ID | 25mm | ||||||||||||||||||||||||||||||
4 | Length | 963mm | ||||||||||||||||||||||||||||||
5 | Working Pressure | 70Mpa(10000psi) | ||||||||||||||||||||||||||||||
6 | Tensile Strength | 1628KN | ||||||||||||||||||||||||||||||
7 | Burst Pressure | 113.6Mpa | ||||||||||||||||||||||||||||||
8 | Collapse Pressure | 150Mpa | ||||||||||||||||||||||||||||||
9 | Torque Strength | 15kN.m | ||||||||||||||||||||||||||||||
10 | Working Temp. | -29oC~180oC | ||||||||||||||||||||||||||||||
11 | Service | H2S NACE MR0175(Above 175F) | ||||||||||||||||||||||||||||||
12 | Connection Thread | EUE/IF/CAS | ||||||||||||||||||||||||||||||
13 | Througth Area | 1700mm2 |