
Add to Cart
Rupture Disk Sampler RD Sampler For Drill Stem Testing Service
The Rupture Disk Sampler is a full-open, full bore sleeve sampler for use on drill stem tests. The RD sampler isused for trapping formation fluid under pressure in downhole. The sampler is controlled by a pressure-operated rupture disk and has a sample mandrel with a built-in differential area. To catch a sample, annulus pressure is increased to a predetermined level, the rupture disk in the sampler breaks, and the mandrel traps the sample.
When the rupture disk breaks, the differential area of the sample mandrel is exposed to an air chamber on one side and hydrostatic pressure and applied annulus pressure on the other. This condition results in the sample mandrel moving up and trapping the sample. When the sample mandrel reaches the top of its stroke, it is locked in place by a set of locking dogs
Technical parameter of Rupture Disk Sampler RD
Size | 127.5mm(5”) | ||||||||||||||||||||||||||||||
ID | 57mm | ||||||||||||||||||||||||||||||
Length | 2198mm(IF BxP) | ||||||||||||||||||||||||||||||
Working Pressure | 105Mpa | ||||||||||||||||||||||||||||||
Tensile Strength | 2417KN | ||||||||||||||||||||||||||||||
Sampling Volume | 1200CC | ||||||||||||||||||||||||||||||
Sampling Chamber Pressure Rating | 70Mpa | ||||||||||||||||||||||||||||||
Torque Strength | 71KN.m | ||||||||||||||||||||||||||||||
Service | NACE MR0175,Above 175F | ||||||||||||||||||||||||||||||
Working Temperature | -29oC~204oC | ||||||||||||||||||||||||||||||
Connection Thread | 3 1/2” IF BXP 3 7/8” CAS BXP |