XI 'AN ZZ TOP OIL TOOLS CO.,LTD
XI 'AN ZZ TOP OIL TOOLS CO.,LTD Insist Traceability, serialization
Add to Cart
API Oil and Gas Manifold / Divert Manifold For Well SurfaceTesting Equipment
The Oil and Gas Manifolds are used to divert oil or gas during the well testing service. The Oil & Gas manifold divert oil or gas without flow interruption, from the separator to burners for disposal, to a tank for measurements or storage, or to a production line.
The Oil manifold consists of five ball valves arranged as a manifold and is skid-mounted, it allows oil leaving the separator to be diverted to the tank or the burners,or sent directly to a production line
The gas manifold is fitted with two ball valves and is also mounted on a skid.It'sconnected to the separator gas line and to the burner flare lines.
Technical Parameter of Oil and Gas Manifold
| 1 | Service | H2S and CO2 | |||||
| 2 | Max. operating pressure | 2000psi i.e. 14MPa | |||||
| 3 | The highest operating temperature | 250℉ i.e. 121℃ | |||||
| 4 | The lowest operating temperature | -20℉ i.e. -29℃ | |||||
| 5 | Type of valve | ball valve | |||||
| 6 | Assembly I.D | 3″ | |||||
| 7 | Connecting will be according to customers' requirement | ||||||
| 8 | Inlet | 3″FIG602 female union or FIG1502 | |||||
| 9 | Outlet | 3″FIG602 male union or FIG1502 | |||||
| 10 | Standard | H2S and CO2 proof NACE MR 0175 | |||||
